DW Series draw wire position sensor

ranges: 200~60000mm analogue 0.1% plus or minus of FSO digital 0.05% plus or minus of FSO customized version high EMC grade

DW Series Introduction

Precise draw wire position sensor DW50/70/90/130/135

Effective travel:200 ~ 60000mm

Linearity:±0.1%

Woking voltage: DC5~24V

Resistance: 5K±20% (Customizable)

Analog signals output:

2A1:2 wires, 4-20mA, current output

3A1:3 wires, 4-20mA, current output

3V1:3 wires, 0-10V, voltage output

3V2:3 wires, 0-5V, voltage output

4A1:4 wires, 4-20mA, current output

4V1:4 wires, 0-10V, voltage output

4V2:4 wires, 0-5V, voltage output

Absolute value encoder output:

SSI: Synchronous Serial Interface

PRO: Profibus-DP

CAN: CAN open

DVN: Device Net

CAT:Ether CAT

Increase-type encoder output

Operating temp.: -20~85°C

Lifetime: ≥2 M times

EMC:EN 61326-1:2006

Cable or aerial plug connection (flexible)

Metal case design, high mechanical strength, small size, convenient to install

Precise wire-wound conductive plastic potentiometer, coil spring reset, smooth to rotate

Ideal for equipments for storage, wood-working machine, automotive safety test, and waterlocks control

Analog-output
Measurement range	200,250,300,500,750,(1000~60000)	mm
linearity	0.4,0.3,0.3,0.2,0.2,0.1	%
Sensor	Precision wire-wound conductive plastic
Output	0-5K ohm;0-5/10V(4-20mA)
Work Voltage	Max.30; 12-24	V DC
Lifetime	≥2M	Times
Operating temp.	-20~+85	°C
Reciprocating speed	1	m/s
Protection Class	IP65;IP67
Relative humidity	Less than 90	%
Shell material	Alumina
Connection	M12 connector or cable output
Digital-output
Supply voltage	DC+5±5%(or) +5~12V,+12~24V,+5~24V	V DC
Output voltage	Vh≥85%Vcc, Vl≤0.3V
Current consumption	Less than 120	mA
Response frequency	0~100	KHz
Output waveform	Square wave
t/T*100%	0.5T±0.1T
Vibration	50m/s2,10~200Hz,XYZ direction 2h for each
Shock	980m/s2,6ms,XYZ direction 2h for each
Lifetime	MTBF≥50000	h
Work temp.	-25°C~85°C	°C
Work humidity	30~85%,no condensation
IP	IP65

DW Series draw wire position sensor